Skip to content
KONTAKT OSS
Kontakt oss

Husk at du også kan ringe oss mandag til fredag mellom 0900 og 1600 på +4722641060.

DreamScreen ProSilence FluxCore Compound™ Red 10l

451,89

Water-based viscoelastic damping compound for walls, ceilings and floors. Reduces vibrations and resonance between board layers and is part of the DreamScreen ProSilence FluxCore™ system.

Out of stock

🔴 DreamScreen ProSilence FluxCore Compound™ Red

High-performance damping compound for walls, ceilings and floors

DreamScreen ProSilence FluxCore Compound™ Red is an advanced viscoelastic damping compound designed to reduce vibration, resonance and sound transmission in walls, ceilings and floors.

The compound is applied between two rigid board layers, such as fiberboard, gypsum, OSB or plywood, where it acts as a damping layer that converts vibration energy into heat. The result is reduced structure-borne sound, lower resonance and improved sound insulation over a wide frequency range.

Unlike traditional constructions that rely primarily on mass alone, ProSilence FluxCore Compound™ Red is part of the DreamScreen ProSilence FluxCore™ system. Together with FluxCore Clips™, FluxCore U-Boats™, fiber gypsum and mineral wool, a complete soundproofing system is created that combines decoupling, damping, mass and absorption.

The distinctive red color makes it easy to check the coverage during installation, contributing to an even and correct result.

✅ Benefits

🔴 Reduces resonance and vibrations in walls, ceilings and floors

🔴 Improves airborne sound insulation and reduces structure-borne sound

🔴 Water-based formulation with very low emissions

🔴 Not flammable

🔴 Easy application with a notched trowel or roller

🔴 Red color makes it easy to check coverage

🔴 Long life expectancy

🔴 Ideal for home theater, studio, music room and residential projects

🔴 Part of the complete ProSilence FluxCore™ system

🔴 Made in Sweden

🏗 Recommended structure

For maximum effect, it is recommended to use between two layers of fiber plaster or other rigid boards:

Fiber gypsum → FluxCore Compound™ Red → Fiber gypsum

Combined with FluxCore Clips™ or FluxCore U-Boats™, the result is a design that effectively reduces both airborne and structure-borne sound.

🌱 Documented low emissions

Independent measurements carried out by RISE Research Institutes of Sweden show very low emissions:

✔ TVOC: 49 µg/m³

✔ Formaldehyde: <5 µg/m³

✔ No detected carcinogenic VOCs

✔ Meets the requirements for the recommended class in Byggvarubedömningen

🎬 Typical applications

  • Home cinema
  • Music room
  • Sound studio
  • Apartments
  • Townhouse
  • Offices
  • Hotels & Resorts
  • Schools
  • Health buildings
Weight 12 kg
Dimensions 50 × 50 × 50 cm