NEW! AutoCalc allows you to automatically calculate your material needs for a complete soundproofing of your room >>
In our experience, the easiest way to apply is to use a standard, slightly wide-toothed notched trowel, i.e. the special applicator is not necessary.
Each pail corresponds to approx. 23 tubes of Green Glue (0.83l per tube).
If you use the recommended amount (2 tubes per plasterboard of 1.2×2.4m), one “pail” will cover 34 square meters.
Datasheets & reports:
UL Flame and SMoke Generatation for Green GLue compound and Sealant 2016-05-10
CARB 310 Green Glue Noiseproofing Sealant saintgobain-214-08-031_VOC Emission
Information from the manufacturer (English):
Green Glue is a liquid, waterborne, viscoelastic damping compound which represents the highest performance product of it’s type. We are aware of no product available to the construction market which can deliver damping levels even 30% as high as those offered by Green Glue. It is also significantly lower in applied cost than competitive products, giit a good cost/performance ratio in the damping of normal construction materials such as drywall, wood products, etc. Finally, it is remarkably tolerant to real-world application conditions and carries almost none of the burden of precision required by many damping systems.
– Non toxic
– No mixing required
– Simple, familiar, “caulk gun” application
– Considerably reduced application cost
– Light material squeezes from tubes easily low worker fatigue
Walls and Ceiling
– Improved sound insulation
– Constructions with outstanding low frequency isolation are possible
– Thoroughly lab tested
– Eliminates short circuit risk in resilient channel walls
– Allows construction of the highest performance walls possible (in combination with double stud walls)
– Reduction in structure-borne sound
– Low cost product = great $$$/performance
Floors:
– Reduced impact noise
– Improved resistance to airborne sound
– Lower in cost than most floor treatments
– Reduction in structure-borne sound
Other Applications:
– Tremendous performance is risers, equipment platforms, stages, and other unique structures found in home theaters.
– DIY and OEM loudspeaker construction – more inert cabinets with damping factors up to 20x higher than raw MDF
Specifications:
Active Content:
68% +/-5%
Working Time:
>30 minutes
Cure Time:
7 days
Viscosity:
Light Paste (65,000 cps)
Odor:
Mild (Temporary)
VOC:
<2g/liter
Flash Point:
>200 deg F
Application Temp:
40-90 deg F
Damping Factor:
Typically 0.50+ with 2*5/8 fire code drywall
(3X higher than any competitive product we are aware of)
Reviews
There are no reviews yet.