NEW! AutoCalc allows you to automatically calculate your material needs for a complete soundproofing of your room >>
NB! Remember to order the applicator gun as well (accessory) as the GreenGlue tubes are too big for regular applicators.
Each tube (much larger than standard tubes) contains 28oz = 0.83l mass. It is recommended that you use between 2 tubes per standard plasterboard (1.2×2.4m), which means that you should calculate around 0.6 tubes per square meter. For example, if you want to cover a wall of 15 square meters and use 2 tubes per plasterboard, you buy 15×0.6=9 tubes.
Datasheets & reports:
UL Flame and SMoke Generatation for Green GLue compound and Sealant 2016-05-10
CARB 310 Green Glue Noiseproofing Sealant saintgobain-214-08-031_VOC Emission
Information from the manufacturer (English):
Green Glue is a liquid, waterborne, viscoelastic damping compound which represents the highest performance product of it’s type. We are aware of no product available to the construction market which can deliver damping levels even 30% as high as those offered by Green Glue. It is also significantly lower in applied cost than competitive products, giit a good cost/performance ratio in the damping of normal construction materials such as drywall, wood products, etc. Finally, it is remarkably tolerant to real-world application conditions and carries almost none of the burden of precision required by many damping systems.
– Non toxic
– No mixing required
– Simple, familiar, “caulk gun” application
– Considerably reduced application cost
– Light material squeezes from tubes easily low worker fatigue
Walls and Ceiling
– Improved sound insulation
– Constructions with outstanding low frequency isolation are possible
– Thoroughly lab tested
– Eliminates short circuit risk in resilient channel walls
– Allows construction of the highest performance walls possible (in combination with double stud walls)
– Reduction in structure-borne sound
– Low cost product = great $$$/performance
Floors:
– Reduced impact noise
– Improved resistance to airborne sound
– Lower in cost than most floor treatments
– Reduction in structure-borne sound
Other Applications:
– Tremendous performance is risers, equipment platforms, stages, and other unique structures found in home theaters.
– DIY and OEM loudspeaker construction – more inert cabinets with damping factors up to 20x higher than raw MDF
Specifications:
Active Content:
68% +/-5%
Working Time:
>30 minutes
Cure Time:
7 days
Viscosity:
Light Paste (65,000 cps)
Odor:
Mild (Temporary)
VOC:
<2g/liter
Flash Point:
>200 deg F
Application Temp:
40-90 deg F
Damping Factor:
Typically 0.50+ with 2*5/8 fire code drywall
(3X higher than any competitive product we are aware of)
Coverage:
Approx. 16 sq ft per tube at full coverage
Installation guide from the manufacturer: https://www.greengluecompany.com/Installation
Reviews
There are no reviews yet.