01 / Work to the board instructions.
Cutting is part of joint preparation.
Follow the board manufacturer’s method for cutting, snapping and finishing edges. Confirm the correct tool for apertures and shaped cuts.
Tools / Board preparation
Supporting materials
Fermacell Scoring Knife
Prepare the board.
Keep the detail precise.
A scoring knife for preparing Fermacell gypsum fibre boards using the permitted score-and-snap method.
For project specification and partner enquiries. No direct checkout.
PURPOSE / PRINCIPLE / APPLICATION
02 / Finish ready for installation.
Maintain the specified edge.
Prepare cut edges for the selected jointing method and keep board dimensions consistent with the support layout.
FROM CONCEPT TO SPECIFICATION
The right document.
The right construction.
Request the current product information and installation details for the component and revision you are specifying. Performance belongs to the documented assembly; load and acoustic measurements have separate scopes.
Request technical documents ↗01
Define the room.
Start with the surfaces, use, space and equipment loads.
02
Choose the build-up.
Confirm components, supporting materials and local requirements.
03
Share the plan.
Use the System Planner to prepare an initial quantity schedule.
SYSTEM THINKING
One component.
Part of the whole.
Lining / Board mass
Fermacell Gypsum Fibre Board — square edges
A 600 × 2400 × 12.5 mm gypsum fibre board for the selected lining build-up. Combine the board layers, fixings, joint treatment and Compound…
Explore component ↗
Lining / Board mass
Fermacell Gypsum Fibre Board — two tapered edges
A 600 × 2400 × 12.5 mm gypsum fibre board for the selected lining build-up. Combine the board layers, fixings, joint treatment and Compound…
Explore component ↗
Board joints / Adhesive
Fermacell Greenline Joint Adhesive — 310 ml
Fermacell Greenline joint adhesive for the specified square-edge gypsum fibre board jointing method, supplied in a 310 ml cartridge.
Explore component ↗