Walls + ceilings / Mechanical decoupling
FluxCore Clip
A softer inner core. A firmer outer core. Load-bearing steel around them. FluxCore Clip connects the lining to the supporting structure through a multi-density…
Explore component ↗PROSILENCE / SYSTEM COMPONENTS
Start with FluxCore and CineVent. Complete the specification with the supporting boards, fixings and materials your project needs.
27 components
Isolation first. CineVent units and their filters are grouped together at the end of this section.
Walls + ceilings / Mechanical decoupling
A softer inner core. A firmer outer core. Load-bearing steel around them. FluxCore Clip connects the lining to the supporting structure through a multi-density…
Explore component ↗Floating floors / Resilient support
Bring The FluxCore Effect beneath the floor. FluxCore U-boat provides a resilient connection under the floor battens, so the supporting layout becomes part of…
Explore component ↗Between board layers / Viscoelastic damping
Add damping where rigid board layers meet. FluxCore Compound Red is a water-based viscoelastic compound used alongside mechanical decoupling and board mass in the…
Explore component ↗Walls + ceilings / Lining support
The 2-metre ProSilence Furring Channel forms the support for the lining when used with the specified isolation clips. Plan the channels, joints, board layout…
Explore component ↗Connections / Structural accessory
A ProSilence floor joist bracket for the appropriate construction detail. Confirm compatibility and the load-bearing arrangement before installation.
Explore component ↗Connections / Structural accessory
A ProSilence ceiling joist hanger for the appropriate construction detail. Confirm compatibility and the load-bearing arrangement before installation.
Explore component ↗Connections / Channel joints
A pack of 100 self-drilling TORX screws, 32 mm long, for the specified ProSilence connection details.
Explore component ↗Ventilation / Heat recovery
Bring ventilation into the room design rather than treating it as an afterthought. CineVent 150 combines supply and extract ventilation, heat recovery and filtration…
Explore component ↗Ventilation / Heat recovery
Bring ventilation into the room design rather than treating it as an afterthought. CineVent 350 combines supply and extract ventilation, heat recovery and filtration…
Explore component ↗Ventilation / Service parts
A replacement filter item for CineVent 350. Confirm the unit revision and the required filter set before ordering.
Explore component ↗Ventilation / Service parts
A replacement filter item for CineVent 150. Confirm the unit revision and the required filter set before ordering.
Explore component ↗Supporting products for a defined project specification.
Lining / Board mass
A 600 × 2400 × 12.5 mm gypsum fibre board for the selected lining build-up. Combine the board layers, fixings, joint treatment and Compound…
Explore component ↗Alternative damping material
Green Glue Noiseproofing Compound, supplied as an 18.9 L pail, retained in the supporting-material catalogue for projects that specify this product.
Explore component ↗Tools / Application
An applicator for Green Glue 830 ml tubes. Match the tool to the container and the product application instructions.
Explore component ↗Perimeters + joints / Acoustic sealant
An 830 ml acoustic sealant for the specified perimeter and junction details in the selected sound-isolation construction.
Explore component ↗Lining / Board mass
A 600 × 2400 × 12.5 mm gypsum fibre board for the selected lining build-up. Combine the board layers, fixings, joint treatment and Compound…
Explore component ↗Openings / Configured doors
A project-configured Daloc T34 door, listed in the source catalogue with a 43 dB sound-insulation class. Specify the complete doorset, not only the door…
Explore component ↗Openings / Configured doors
A project-configured Daloc S30 door, listed in the source catalogue with a 50 dB sound-insulation class. Specify the complete doorset, not only the door…
Explore component ↗Tools / Application
An applicator for Green Glue compound pails. Match the tool to the container and the product application instructions.
Explore component ↗Board joints / Adhesive
Fermacell Greenline joint adhesive for the specified square-edge gypsum fibre board jointing method, supplied in a 310 ml cartridge.
Explore component ↗Lining / Board fixings
Fermacell 3.9 × 30 mm screws supplied in collated strips for a compatible auto-feed tool. Specify the fixing length and schedule for the board…
Explore component ↗Alternative damping material
Green Glue Noiseproofing Compound, supplied as an 830 ml tube, retained in the supporting-material catalogue for projects that specify this product.
Explore component ↗Lining / Board fixings
Fermacell 3.9 × 30 mm screws supplied in a 1000-piece box. Specify the fixing length and schedule for the board layer and supporting frame.
Explore component ↗Tools / Board preparation
A scoring knife for preparing Fermacell gypsum fibre boards using the permitted score-and-snap method.
Explore component ↗For existing specifications; explore FluxCore for new projects.
Floating floors / Earlier series
The RED-series ProSilence U-boat remains listed for projects that specify this support. It is distinct from the current FluxCore U-boat.
Explore component ↗Walls + ceilings / Earlier clip series
The BLACK-series ProSilence clip is an earlier isolation-clip generation. Use the product documentation and connection details for this version when maintaining or extending an…
Explore component ↗Floating floors / Earlier series
The BLACK-series ProSilence U-boat remains listed for projects that specify this support. It is distinct from the current FluxCore U-boat.
Explore component ↗No matching components. Try a product name or clear the filter.