Lining / Board mass
Supporting materials
A 600 × 2400 × 12.5 mm gypsum fibre board for the selected lining build-up. Combine the board layers, fixings, joint treatment and Compound Red with the ProSilence isolation system.
For project specification and partner enquiries. No direct checkout.
PURPOSE / PRINCIPLE / APPLICATION
01 / Specify the assembly.
Use the layer arrangement required by the project, with support spacing, screw lengths and perimeter detailing matched to that arrangement. A single board does not carry a universal Rw rating and is not an automatic substitute for two layers in a tested assembly.
02 / Finish the correct edge.
The two tapered edges allow a specified filled-and-reinforced joint finish. Use the correct joint treatment and account for untapered cut edges; do not automatically use the square-edge adhesive method.
03 / Equipment loads.
Plan equipment mounts with appropriate reinforcement and the board manufacturer’s fixing guidance. Neither board strength nor the load capacity of a FluxCore Clip is a blanket rating for a single screw, projector or loudspeaker mount.
04 / Plan quantities.
Use the System Planner for the selected surfaces and layers. One board covers 1.44 m² before layout and cutting considerations. Local supply formats may differ; confirm the specified board, not just its nominal area, before substituting materials.
FROM CONCEPT TO SPECIFICATION
Request the current product information and installation details for the component and revision you are specifying. Performance belongs to the documented assembly; load and acoustic measurements have separate scopes.
Request technical documents ↗Start with the surfaces, use, space and equipment loads.
Confirm components, supporting materials and local requirements.
Use the System Planner to prepare an initial quantity schedule.
SYSTEM THINKING
Between board layers / Viscoelastic damping
Add damping where rigid board layers meet. FluxCore Compound Red is a water-based viscoelastic compound used alongside mechanical decoupling and board mass in the…
Explore component ↗Lining / Board fixings
Fermacell 3.9 × 30 mm screws supplied in a 1000-piece box. Specify the fixing length and schedule for the board layer and supporting frame.
Explore component ↗Board joints / Adhesive
Fermacell Greenline joint adhesive for the specified square-edge gypsum fibre board jointing method, supplied in a 310 ml cartridge.
Explore component ↗Walls + ceilings / Mechanical decoupling
A softer inner core. A firmer outer core. Load-bearing steel around them. FluxCore Clip connects the lining to the supporting structure through a multi-density…
Explore component ↗
